HUSK Å PÅFØRE HVILKET KALIBER SOM ØNSKES!
The basic 750/650 includes the following:
One powder measure with standard large and small powder bars (small bar installed), Small bar throws from 2.1 to 15 grains of powder, Large bar throws from 15 to 55(extruded type)-60(ball/spherical type) grains of powder.
- One prime system with large and small priming parts(appropriate size installed).
- One large and one small primer pick-up tube.
- One loaded cartridge bin
- One toolhead
DIFFERENCES BEWEEN THE XL750 AND THE XL650
Many current and potential customers are asking about the differences between Dillon's XL650 and the nw XL750.
The XL750 has a simplified linear priming system. It only requires the removal of two nuts to detach and change sizes on the primer feed system. Like the XL650, the 750 deprimes in station 1 and primes in station 2, minimizing any chance that spent primer residue could interfere with priming.
The shellplate indexing mechanism has been completely redesigned, so the shellplate turns more smoothly, decreasing cases wobble. The index pawl has been relocated on the ring indexer and the spring direction reversed. This makes it more difficult to accidently break the ring indexer. The index block now has a roller, which also smoothes out indexing.
Additionally, the index block incorporates a spring-loaded overtravel stop, which significantly increases the life of springs on the machine.
All caliber conversion kits, toolheads and most parts interchange freely between the XL750 and the XL650. Parts that are unique to the XL650 will remain in full production.